Loading... Please wait...

Cloud CX263

CLICK TO ENLARGE

  • Image 1
  • Image 2

Product Overview

The CX263 is the ideal solution for leisure, licensed and
retail venues.

This compact unit has 6 line level inputs and 2 mic inputs with paging microphone access on Mic 1. The CX263 has one stereo and two mono zones. The line inputs and mics can be independently routed to any output zone via the front panel controls, alternatively the music signals on each zone can be controlled remotely by the RL-1 (level only) or RSL-6
(source and level).

Additional remote control functions can be provided by
the optional serial interface card (RS232) CDI-S200 shown
fitted on the rear panel which can control the music level and source on each zone, access for Mic 1 on each zone, and access for Mic 2 on each zone. This compact unit is easy to install and operate but has the flexibility to provide a solution for many differing environments.

Applications

Features

  • 1 stereo zone and 2 mono zones
  • Easy to use
  • Easy to install and configure
  • 6 stereo line inputs
  • Line 6 priority over other input sources in all zones
  • Remote music mute
  • Paging microphone access for Mic 1 only
  • Microphone over music priority
  • Two band microphone EQ behind front panel facia
  • 100Hz high pass filter on all microphone inputs
  • Two band music EQ per zone on the rear panel
  • Front panel gives Mic 1 level, Mic 2 level, music level and music source selection controls
  • Optional equaliser modules for Bose loudspeakers can be fitted to any output
  • Optional CDI-S200 Serial Interface Card (RS232)

Accessories

  • RL-1 & RL-1A Remote Music Level Control
  • RSL-6 Remote Music Source Select
  • XLRF1 Female XLR Input Module
  • XLRM1 Male XLR Input Module
  • BOSE Loudspeaker EQ Card
  • CDI-S200 Optional RS232 Module Card for CX263
    Zone Mixer
  • EQ Cards for Amina AIWX & LFiT Loudspeakers
  • RSL-6B Remote Source / Volume Level Select Plate in Black
  • RSL-6W Remote Source / Volume Level Select Plate in White
  • RL-1B Remote Volume Level Control Plate in Black
  • RL-1W Remote Volume Level Control Plate in White
  • RL-1MW Remote Volume Level Media Control Plate in White
  • PM1 Paging Microphones
  • PM4 Paging Microphone

Specifications

Full specifications are available under the Downloads tab above

Line Inputs:

  • Frequency Response: 20Hz-22kHz, +0, -0.5dB
  • Distortion: 20Hz-22kHz, <0.05% Typical
  • Sensitivity: 100mV (-17.8dBu) to 1.5V (+6dBu)
  • Input Gain Control: 24dB range
  • Input Impedance: 48kW
  • Headroom: >20dB
  • Noise: 20Hz-22kHz (0dB gain), -88dB rms typical
  • Equalisation: LF: ±10dB 50Hz, HF: ±10dB 10kHz

 

Microphone Inputs:

  • Frequency Response: 100Hz -3dB (filter), 20kHz ±0.5dB
  • Distortion: 20Hz-22kHz, <0.05%
  • Gain Range: 10dB to 50dB
  • Input Impedance: >2kW (balanced)
  • Common Mode Rejection: 1kHz, >70dB
  • Headroom: >20dB
  • Noise: 20Hz-22kHz (0dB gain), -128dB EIN
  • Equalisation: LF: ±10dB 150Hz, HF: ±10dB 5kHz

 

Outputs:

  • Nominal Output Level: 0dBu
  • Minimum load impedance: 1k2W
  • Maximum Output Level: +20dBu

 

General:

  • Power Input: 230V/115V ±10%
  • Fuse Rating: T100mA 230V
                        T200mA 115V
  • Fuse Type: 20mm x 5mm 250V
  • Dimensions: 482.60mm x 44.00mm(1U) x 152.5mm
  • Weight (kg): 2.15

Product Downloads

  • CX263 Manual PDF 0.5 MB
  • CX263 Jumper Settings PDF 0.0 MB
  • CX263 Brochure PDF 2.6 MB
  • CX263 Datasheet PDF 0.4 MB

Videos



Take The Next Step

Enquire about this product

Product Categories

*Prices are in AUD, include GST and are subject to change. Please call National Audio for pricing and availability on the CX263.