Loading... Please wait...

Listen Technologies LPT-C2


  • LPT-C2 Front
  • LPT-C2 Rear

Product Overview

The C2 ListenPoint Control Unit is the heart of a standard ListenPoint system. It’s simple and easy for users with one, intuitive control for adjusting volume and selecting audio sources (volume can also be adjusted on the M1).

The Control Unit connects to the Room Module using a single Cat-5e cable. Audio and control devices connect to the rear panel. Extensive customization of system through password protected front panel or via USB port. The tilting LCD is easy to read and displays the status of all M1s on the system including battery level. The C2 delivers outstanding performance on a budget. Designed to blend into any room, the control unit can be wall, desk or rack mounted.



  • Two (2) unbalanced inputs for external audio sources, one (1) unbalanced output to record from or for an assistive listening system and a USB port for customization.
  • Great for classrooms and smaller rooms with limited audio sources
  • Simple and easy for users with one intuitive control for adjusting volume and selecting audio sources.
  • Single point of connection via Cat-5e cabling makes installation and maintenance simple.
  • Delivers outstanding performance on a budget.
  • Automatic audio selection - volume can be controlled via the CU or M1.
  • Tilting LCD Screen shows audio selection, volume, M1 status and battery level. When mounted the LCD can be inverted 180° for optimum viewing angle.
  • Designed to blend into any room, can be wall, desk or rack mounted with supplied mounting platform and hardware.


Full specifications are available under the Downloads tab above

  • Unbalanced Input Two (2) Stereo inputs via phono connectors, unbalanced, -10dBu nominal input level, +2 dBu maximum, adjustable -30/+12dB, impedance 100k Ohms.
  • Unbalanced Output One (1) Dual Mono Output, Phono Connector, -10dBu, 10 Ohm
  • Headphone Output One (1) 3.5 mm stereo connector, unbalanced, adjustable output level, +10 dBu maximum, impedance 10 Ohm.
  • Input to Output Frequency Response 20 Hz to 20 kHz, +/- 2 dB, < 2.0% THD, >75 dB SNR
  • Microphone to Output Frequency Response 200 Hz to 15 kHz, +/- 2 dB, < 2.0% THD, >75 dB SNR
  • Front Panel Power Button, LCD, Control Dial, Headphone Level
  • Back Panel USB , CAT-5e Output w/ LED indicator, Power Input, System Reset

Product Downloads

  • LPT-C2 Data Sheet PDF 0.6 MB
  • LPT-C2 Placement Tech Notes PDF 0.5 MB
  • LPT-C2 Quick Reference Card PDF 0.7 MB
  • LPT-C2 Software Installation ZIP 3.1 MB
  • LPT-C2 Customisation Guide PDF 1.0 MB
  • LPT-C2 Install Guide PDF 3.5 MB


Take The Next Step

Enquire about this product

Product Categories

*Prices are in AUD, include GST and are subject to change. Please call National Audio for pricing and availability on the LPT-C2.