Loading... Please wait...

Listen Technologies LPT-R12


  • Image 1
  • Image 2

Product Overview

The R12 ListenPoint Room Module (RM) is designed to easily mount on the ceiling or on the wall of a room and its primary purpose is to communicate with the ListenPoint Microphone/Media Interface (M1) via infrared light and provide power amplification (60 Watts) for the speakers mounted in the ceiling or on a wall. It connects to Control Unit with one (1) Cat-5e cable reducing cable clutter.

The RM has a built in IR sensor/emitter that bi-directionally communicates with up to two (2) M1’s. Two (2) additional sensors may be added to the RM. The RM has a paging input and a general purpose interface for controlling or accepting control to/from other devices. The paintable surface (except the sensor lens) snaps into a supplied mounting platform and has a cable cover that hides the cables.



  • Single point of contact for ceiling or wall speakers (60 Watts), expansion sensors, paging input and general purpose interface.
  • Connects to the Control Unit via Cat-5e cable, making installation and maintenance simple.
  • Bi-directional communication between M1 and room module provides excellent performance, coverage, features and reliability


Full specifications are available under the Downloads tab above

  • Speaker Output Four (4) amplifier channels w/ 2-pin euro connectors, each 4 Ohms @ 15 watts (60 watts total)
  • Paging Input One (1) 2-pin Euro Connector, 8 ohm, 25 V, 70 V and 100 V - internally selectable
  • 6 - 12 VDC Input One (1) 2-pin Euro Connector, 600 Ohms
  • Relay Output One (1) 3-pin Euro Connector, Latching or Pulse Relay -
  • programmed via software
  • Microphone to Speaker Output
  • Frequency Response 200 Hz to 15 kHz, +/- 2 dB, < 2.0% THD, >75 dB SNR
  • Input to Speaker Output
  • Frequency Response 20 Hz to 20 kHz, +/- 2 dB, < 0.1% THD, >75 dB SNR
  • Speaker EQ Quickfilter®, 512 points of equalization by speaker model
  • Room EQ Five (5) band parametric, Two (2) tone controls
  • Infrared Emitter 38 kHz subcarrier
  • Infrared Sensor 2.3 MHz, 2.8 MHz
  • External Infrared Sensor Two (2) phono connectors provided

Product Downloads

  • LPT-R12 Data Sheet PDF 0.4 MB
  • LPT-R12 Install Guide PDF 3.5 MB
  • LPT-R12 Placement Tech Notes PDF 0.1 MB
  • LPT-R12 Quick Reference Card PDF 0.3 MB


Take The Next Step

Enquire about this product

Product Categories

*Prices are in AUD, include GST and are subject to change. Please call National Audio for pricing and availability on the LPT-R12.