Loading... Please wait...

d&b audiotechnik Q10


  • Image 1

Product Overview

The Q10 is a 110° x 40° passive 2-way loudspeaker housing two 10" LF drivers and a 1.3" HF compression driver with a rotatable constant directivity horn and a passive crossover network. The two 10" neodymium LF drivers are positioned in a dipolar arrangement providing exceptional vertical dispersion control with the nominal angle being maintained down to 400 Hz.

When used in the upright configuration it has a very accurate 110° horizontal constant directivity behaviour that is maintained down to approximately 800 Hz. Its wide constant directivity performance provides remarkable transparency when used in close proximity to listeners. It is also ideally suited to ambient and /or distributed sound reinforcement tasks where orientation within the sound field is critical. The Q10 can be used as a stand-alone full range system or in combinations with other Q-Series cabinets ground stacked, or mounted on a high stand with the Q Flying bracket.

The Q10 can be driven either by the d&b D6 or D12 dual channel power amplifiers configured for the Q10. More detailed information on specific loudspeaker setups with d&b amplifiers is available either in the relevant loudspeaker or amplifier manuals.



The Q10 cabinet is constructed from marine plywood and has an impact resistant paint finish. The front of the loudspeaker cabinet is protected by a rigid metal grill, covered with a replaceable acoustically transparent foam. The cabinet incorporates a pair of handles and mounted on the rear panel are two EP5 or NL4 connectors wired in parallel.


  • System data
  • Frequency response (–5 dB standard)    60 Hz - 17 kHz
  • Frequency response (–5 dB CUT mode)    40 Hz - 100 Hz
  • Max. sound pressure (single cabinet, 1 m, free field)     
  • with D6    128 dB
  • with D12    131 dB
  • Input level (100 dB-SPL/1 m)     –17 dBu
  • Loudspeaker data    
  • Nominal impedance    8 ohms
  • Power handling capacity (RMS/peak 10 ms)    400/1600 W
  • Nominal dispersion angle (hor. x vert.)    110° x 40°
  • Components    2 x 10” driver
                1.3” compression driver
                Passive crossover network
  • Connections    2 x EP5
                (optional 2 x NL4)
  • Pin assignments    EP5: 1/2
                NL4: 1+/1–
  • Weight    22 kg (49 lb)

Product Downloads

  • Q10 User Manual v1.4 PDF 0.2 MB
  • Q10 Q-Series Rigging Manual v1.2 PDF 4.4 MB
  • Q10 Q-Series Brochure PDF 6.0 MB


Take The Next Step

Enquire about this product

Product Categories

*Prices are in AUD, include GST and are subject to change. Please call National Audio for pricing and availability on the Q10.