Loading... Please wait...

InterM QD-4480

CLICK TO ENLARGE

  • Image 1
  • Image 2

Product Overview

4-Channel Power Amplifier

The QD-4480 is a quad, four channel power amplifier amplifiers capable of driving 4Ω loads. Their clean sound quality makes them ideal for permanent installation in professional PA systems or for portable use for live performances. Primarily designed for multi-zone use such as in bars and restaurants, where separate control of the music in several areas is required, these designs may be applicable for use in any situation where a number of low-power amplifiers are required, such as for cue-feeds, effects-loudspeakers, museum displays etc. Three models are available; each combines four separate low-impedance amplifiers in a single 2U rack-mounted case. Each amplifier has an individual input XLR/TRS "Combo" balanced input connector, a level-control with associated signal-present and clip LED’s, and 5 way binding-post speaker output terminals. For added versatility, an input-selector switch allows each pair of amplifiers to be driven either separately (stereo), with inputs in parallel (dual mono), or bridged into mono. Clip-limiters are supplied on each channel to help prevent distortion due to excessive signal levels. All units have soft-start protection circuitry and feature power, signal, protection, and clip indicators on the front panel. These amplifiers are fan-cooled with circuit-protection and turn-on delay. The quad series amplifiers are powered by 100-120VAC or 220-240VAC 50/60Hz (depending on country requirements).

Applications

Primarily designed for multi-zone use such as in bars and restaurants, where separate control of the music in several areas is required, these designs may be applicable for use in any situation where a number of low-power amplifiers are required, such as for cue-feeds, effects-loudspeakers, museum displays etc.

Features

  • QD-4240: 40W@4Ω per Channel
  • QD-4480: 80W@4Ω per Channel
  • QD-4960: 170W@4Ω per Channel
  • Inputs: Balanced Combo Jacks
  • Outputs: Five-Way Binding Posts
  • <0.03% Total Harmonic Distortion
  • Extensive Protection Circuitry
  • Two-Speed Cooling Fan
  • LED Indicators: Power, Signal, Protection, Clip
  • Rack Mount (2RU)

Specifications

  • Power Output: 4 Ω (Quad Ch): 80W, 8 Ω (Quad Ch): 120W, 8 Ω Bridged Mono: 240W
  • Input Sensitivity (8 Ω , 1kHz): 0.775Vrms
  • Input Impedance: 20k Ω Balanced
  • Slew Rate ( 8 Ω , Full Swing): ± 30V/ μsec
  • Frequency Response ( ±0.5dB): 20Hz - 50kHz
  • THD: <0.03%
  • Signal-to-Noise Ratio: 105dB
  • Damping Factor (8 Ω, 1kHz): >100
  • Residual Noise: -85dB
  • Channel Separation (8 Ω , 1kHz): 80dB
  • Voltage Gain (4 Ω ): 29dB
  • Power Source: 100-120VAC or 220-240VAC
  • Power Consumption: 420W
  • Weight (SET): 15.5kg/41.5lb
  • Dimensions (SET): 482(W) x 88(H) x 369(D)mm / 19(W) x 3.5(H) x 14.5(D)in

Product Downloads

  • QD-4480 ED DWG DWG 0.1 MB
  • QD-4480 User Manual PDF 4.6 MB
  • QD-4480 DWG DWG 0.2 MB

Videos



Take The Next Step

Enquire about this product

Product Categories

*Prices are in AUD, include GST and are subject to change. Please call National Audio for pricing and availability on the QD-4480.