Loading... Please wait...

d&b audiotechnik T10

CLICK TO ENLARGE

  • Image 1

Product Overview

The T10 is a passive 2-way loudspeaker housing two 6.5" drivers positioned in a dipolar arrangement and a 1.4" HF compression driver and a passive crossover network. The T10 can be used both as a line array and as a high directivity point source loudspeaker. The HF driver is fitted to a unique waveguide horn producing vertical line source directivity with a 90° horizontal pattern that is maintained down to approximately 600 Hz. An acoustic lens placed in front of the horn widens horizontal dispersion to 105°, rotation of the horn by 90° relative to this produces an accurate point source dispersion transforming a vertically oriented T10 into a standalone full range loudspeaker with 90° horizontal and 35° vertical directivity pattern.

The T10 can be driven either by the d&b D6 or D12 dual channel power amplifiers configured for the T10. More detailed information on specific loudspeaker setups with d&b amplifiers is available either in the relevant loudspeaker or amplifier manuals.

Applications

Features

The T10 cabinet is constructed from polyurethane integral hard foam, incorporates integrated line array rigging hardware and has an impact resistant finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam, and two EP5 or NL4 connectors wired in parallel are mounted on the rear panel.

Specifications

  • T10 system data
  • Frequency response (–5 dB standard)    68 Hz - 18 kHz
  • Frequency response (–5 dB CUT mode)   120 Hz - 18 kHz
  • Max. sound pressure (Line/Arc setups, 1 m, free field)
  • with D6   129 dB
  • with D12    132 dB
  • Max. sound pressure (PS setup, 1 m, free field)
  • with D6    127 dB
  • with D12    130 dB
  • (SPLmax peak, pink noise test signal with crest factor of 4)
  • Input level (100 dB-SPL/1 m)    –13 dBu
  • T10 loudspeaker
  • Nominal impedance    16 ohms
  • Power handling capacity (RMS / peak 10 ms)    200/800 W
  • Nominal dispersion angle (point source, hor. x vert.)    90° x 35°
  • Nominal dispersion angle (line array, horizontal)    105°
  • Splay angle settings    0 - 15° (1° increment)
  • Components    2 x 6.5“ driver with neodymium magnet
        1.4” exit compression driver on rotatable waveguide
        Passive crossover network
  • Connections    2 x EP5
        Optional: 2 x NL4
  • Pin assignments    EP5: 1/2
        NL4: 1+/1–
  • Weight    1 kg (24 lb)

Product Downloads

  • T10 T-Series Brochure PDF 9.1 MB
  • T10 Mobile Sound Products Brochure PDF 4.8 MB
  • T10 User Manual v1.0 PDF 0.3 MB

Videos



Take The Next Step

Enquire about this product

Product Categories

*Prices are in AUD, include GST and are subject to change. Please call National Audio for pricing and availability on the T10.