Loading... Please wait...

d&b audiotechnik Ti10L


  • Image 1

Product Overview

The Ti10L loudspeaker is the installation version of the T10 for deployment as a line array loudspeaker. Road and installation versions differ only in the mounting hardware. The Ti10L cabinet is a passive 2-way design that houses 2 x 6.5” drivers and a 1.4” exit HF compression driver. The very compact loudspeaker design is a unique combination of a rotatable waveguide with horn and an acoustic lens. It provides a vertical line source with a 90° horizontal dispersion that is maintained down to approximately 600 Hz, whilst the integrated lens in the front grill widens the HF dispersion in line array mode to 105°. The two 6.5” neodymium LF drivers are positioned in a dipolar arrangement providing an exceptional dispersion control even at lower frequencies.

The Ti10L can be driven either by the d&b D6 or D12 dual channel power amplifiers configured for the T10 in Line or Arc mode. More detailed information on specific loudspeaker setups with d&b amplifiers is available either in the relevant loudspeaker or amplifier manuals.



The Ti10L cabinet is constructed from polyurethane integral hard foam with an impact resistant finish and has integrated line array rigging hardware which, once deployed is fundamentally invisible when viewed from the front. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Mounted on the rear panel are two NL4 connectors wired in parallel. Special colour (SC) or weather resistant (WR) versions are available.


  • System data
  • Frequency response (–5 dB standard)    68 Hz - 18 kHz
  • Frequency response (–5 dB CUT mode)    120 Hz - 18 kHz
  • Max. sound pressure (Line/Arc setups, 1 m, free field)     
  • with D6    129 dB
  • with D12    132 dB
  • Max. sound pressure (PS setup, 1 m, free field)     
  • with D6    127 dB
  • with D12    130 dB
  • Input level (100 dB-SPL/1 m)    –13 dBu
  • Loudspeaker data     
  • Nominal impedance    16 ohms
  • Power handling capacity (RMS/peak 10 ms)    200/800 W
  • Nominal dispersion angle (line array, horizontal)    105°
  • Splay angle settings    0 - 15° (1° increment)
  • Components    2 x 6.5“ driver with neodymium magnet
         1.4” exit compression driver on waveguide
         Passive crossover network
  • Connections    2 x NL4
         WR option: Fixed cable 5 m (16.4 ft) (H-07-RN-F 2 x 2.5 mm2/AWG 13)
  • Pin assignments    NL4: 1+/1–
         Fixed cable: Brown + / Blue –
  • Weight    11 kg (24 lb) / 10.5kg (23 lb)

Product Downloads

  • Ti10L T-Series Brochure PDF 9.1 MB
  • Ti10L Installation Sound Products Brochure PDF 7.1 MB
  • Ti10L User Manual v1.0 PDF 0.3 MB


Take The Next Step

Enquire about this product

Product Categories

*Prices are in AUD, include GST and are subject to change. Please call National Audio for pricing and availability on the Ti10L.