Loading... Please wait...

d&b audiotechnik Ti10P


  • Image 1

Product Overview

The Ti10P loudspeaker is the installation version of the T10 for deployment as a point source loudspeaker. Road and installation version differ only in the mounting hardware. The Ti10P cabinet is a passive 2-way design that houses 2 x 6.5" drivers, a 1.4" exit HF compression driver and can be used either in horizontal or vertical orientation. The very compact loudspeaker design is a unique combination of a rotatable waveguide with horn and an acoustic lens. The horn can easily be rotated from outside the loudspeaker without tools or removing the front grill. This is achieved through apertures at the cabinet sides which allow rotation to both vertical or horizontal setup.

It provides a vertical line source with a 90° horizontal dispersion that is maintained down to approximately 600 Hz, whilst the integrated lens in the front grill widens the HF dispersion in horizontal setup to 105°. When the loudspeaker is used upright, the lens curves the wave front of the line source providing a 90° x 35° dispersion pattern. The two 6.5" neodymium LF drivers are positioned in a dipolar arrangement providing an exceptional dispersion control even at lower frequencies.

The Ti10P can be driven either by the d&b D6 or D12 dual channel power amplifiers configured for the T10 in Point source (PS) mode. More detailed information on specific loudspeaker setups with d&b amplifiers is available either in the relevant loudspeaker or amplifier manuals.



The Ti10P cabinet is constructed from polyurethane integral hard foam with an impact resistant finish and has integrated threads for attaching installation hardware. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. Mounted on the rear panel are two NL4 connectors wired in parallel. Special colour (SC) or weather resistant (WR) versions are available.


  • System data
  • Frequency response (–5 dB standard)    68 Hz - 18 kHz
  • Frequency response (–5 dB CUT mode)    120 Hz - 18 kHz
  • Max. sound pressure (Line/Arc setups, 1 m, free field)     
  • with D6    129 dB
  • with D12    132 dB
  • Max. sound pressure (PS setup, 1 m, free field)     
  • with D6    127 dB
  • with D12    130 dB
  • Input level (100 dB-SPL/1 m)    –13 dBu
  • Loudspeaker data
  • Nominal impedance    16 ohms
  • Power handling capacity (RMS/peak 10 ms)    200/800 W
  • Nominal dispersion angle (point source, hor. x vert.)    90° x 35°
  • Splay angle settings    0 - 15° (1° increment)
  • Components    2 x 6.5“ driver with neodymium magnet
         1.4” exit compression driver on waveguide
         Passive crossover network
  • Connections    2 x NL4
         WR option: Fixed cable 5 m (16.4 ft) (H-07-RN-F 2 x 2.5 mm2/AWG 13)
  • Pin assignments    NL4: 1+/1–
         Fixed cable: Brown + / Blue –
  • Weight    11 kg (24 lb) / 10.5kg (23 lb)

Product Downloads

  • Ti10P T-Series Brochure PDF 9.1 MB
  • Ti10P Installation Sound Products Brochure PDF 7.1 MB
  • Ti10P User Manual v1.0 PDF 0.3 MB


Take The Next Step

Enquire about this product

Product Categories

*Prices are in AUD, include GST and are subject to change. Please call National Audio for pricing and availability on the Ti10P.