Loading... Please wait...

d&b audiotechnik V10P


  • Image 1

Product Overview

3-Way Passive Loudspeaker

The 3-way passive V10P loudspeaker features two 10“ drivers in a dipole arrangement with a horn loaded 8“ MF driver and a 1.4“ compression driver mounted onto a rotatable CD horn. The innovative horn design for the centrally mounted 8“ MF driver produces a remarkable sensitivity resulting in an exceptional performance in the vocal range. An advanced bass-reflex and venting design delivers an extended LF output with full bandwidth capabilities. All components are arranged symmetrically around the centre axis of the cabinet to produce a perfect symmetrical dispersion pattern. Due to the dipolar arrangement of the LF drivers, broadband dispersion control is maintained down to approximately 350 Hz in the same plane as the dipole.

This point source, high performance loudspeaker offers 110° horizontal directivity matched with a vertical dispersion of 40°; the horn can be rotated by 90° to enable horizontal orientation. The V10P provides a broad variety of deployment possibilities, especially when used as a stand-alone full range system, or combined with other elements from the V-Series, either ground stacked or flown.

The loudspeaker cabinet is constructed from marine plywood, and has an impact and weather protected PCP (Polyurea Cabinet Protection) finish. The front of the loudspeaker cabinet is protected by a rigid metal grill. The V10P cabinet incorporates a pair of handles. M10 threaded inserts are provided for attaching d&b rigging hardware. Additionally, three further M10 sockets accept the 8mm load pin to expand the mounting options.

The d&b audiotechnik loudspeaker range is designed exclusively for operation with d&b amplifiers. These provide power as well as comprehensive control and protection functions tailored to achieve the performance, reliability and longevity associated with the d&b System approach. The d&b D80 amplifier is recommended to drive the V10P. The d&b D20, 30D and D12 amplifiers can also be used with the appropriate loudspeaker configuration selected.


The latest software downloads, 3D models, etc. can be found on the d&b audiotechnik website here.





System data

  • Frequency response (–5 dB standard): 59 Hz - 18 kHz
  • Frequency response (–5 dB CUT mode): 100 Hz - 18 kHz
  • Max. sound pressure (1m, free field) [1]
    with D12/D20/30D: 138 dB
    with D80: 141 dB
  • Cabinets per amplifier channel: 2


Loudspeaker data

  • Configuration: High performance 3-way passive point source loudspeaker
  • Nominal impedance: 8 Ω
  • Power handling capacity (RMS/peak 10 ms): 500/2000 W
  • Nominal dispersion angle (h x v): 110° x 40°
  • Components:
    2 x 10" LF driver with neodymium magnet
    1 x 8" MF driver with neodymium magnet
    1 x 1.4” exit compression driver
    Passive crossover network
  • Connections:
    2 x NLT4 F/M
    optional 2 x NL4 M or 2 x EP5


Dimensions, weight

  • Dimensions (H x W x D): 700 x 308 x 466 mm (27.5 x 12 x 18.3")
  • Weight: 33 kg (75 lb)


[1] SPL max peak test signal: pink noise with crest factor 4

* Application information is presented for guidance only. d&b reserves the right to make any necessary changes to the products and the published specifications. As part of the ongoing development program d&b tries to maintain the highest degree of product compatibility.


Product Downloads

  • V10P Mobile Sound Products Brochure PDF 4.8 MB
  • V10P Data Sheet v1.1 PDF 0.3 MB
  • V10P User Manual v1.1 PDF 1.1 MB


Take The Next Step

Enquire about this product

Product Categories

*Prices are in AUD, include GST and are subject to change. Please call National Audio for pricing and availability on the V10P.