Loading... Please wait...

Ashly nXe


  • Image 1
  • Image 2

Product Overview

nX Amplifiers with Programmable Outputs

Steady. Efficient. Powerful. nX.

Ashly’s new line of nX Power Amplifiers feature lightweight, energy-efficient Class-D switching amplifier technology combined with a switch mode power supply.

Available in three product families, nX is designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centres.

nXe Series: The networkable version of the nX amplifier with the addition of Ethernet control, serial data control, aux preamp outputs, instant standby mode, preset recall, fault condition logic outputs, and optional network audio and digital audio capability.

When you choose Ashly nX, you choose a hand-built, US-made product backed by our team of engineers and an industry-leading 5-year warranty.

Available formats:

  • nXe752: Network Power Amplifier 2 x 75 Watts
  • nXe754: Network Power Amplifier 4 x 75 Watts
  • nXe1502: Network Power Amplifier 2 x 150 Watts
  • nXe1504: Network Power Amplifier 4 x 150 Watts
  • nXe4002: Network Power Amplifier 2 x 400W @ 2 Ohms
  • nXe4004: Network Power Amplifier 4 x 400W @ 2 Ohms
  • nXe8002: Network Power Amplifier 2 x 800W @ 2 Ohms
  • nXe8004: Network Power Amplifier 4 x 800W @ 2 Ohms
  • nXe1.52: Network Power Amplifier 2 x 1,500W @ 2 Ohms
  • nXe1.54: Network Power Amplifier 4 x 1,500W @ 2 Ohms
  • nXe3.02: Network Power Amplifier 2 x 3,000W @ 2 Ohms
  • nXe3.04: Network Power Amplifier 4 x 3,000W @ 2 Ohms



  • 2 and 4-channel high-output, lightweight amplifiers with programmable output on each channel (Hi-Z or Lo-Z, selected via rear panel DIP switches)
  • Power-saving, Energy Management System ‡ (Ashly EMS) automatic <1W sleep-mode (defeatable)
  • Front panel power switch and level controls (can be disabled for security)
  • Front panel LEDs for temperature, current, signal, clip, mute, bridge mode, protect, sleep, and disable (of front panel controls)
  • Neutrik® Combo XLR – 1/4” TRS jack plus Euroblock input connectors
  • Neutrik® speakON® twist locking loudspeaker connectors for security, safety, and reliability
  • Rear panel DIP switches per channel for selection of high pass filter, limiter, input gain, and High-Z or Low-Z speaker output configuration
  • Remote DC level control on each input channel
  • Neutrik® powerCON® detachable AC mains connector
  • Switch mode power supply automatically detects 120V or 240V AC operation
  • Extensive protection circuitry, continuously variable cooling fans
  • Multiple independent internal power supplies provide increased channel separation and reliability
  • Ethernet port for use with control and monitoring of amplifier functions, with front panel COM activity LED
  • Serial data port for use with Ashly remote control devices, or optional RS-232 converter for third party controllers (INA-1)
  • Use Protea™ Software to remotely disable all front panel controls, including the on/off switch, for a tamper-proof installation
  • Real Time Clock with Event Scheduler
  • Instant Standby Mode, 30% reduction in power consumption with on/off triggered by contact closure, software control, or event scheduler
  • Programmable power-on delay
  • Preset recall via contact closure, software control, remote control, or event scheduler
  • Aux preamp outputs, and fault condition logic outputs
  • Optional Cobranet® or Dante®* network audio and AES3 digital audio input with pass-through


Full specifications are available under the Downloads tab above

  • Voltage Gain: Selectable at 26dB, 32dB, 38dB, or 1.4V 
  • Damping Factor: >250 (8 Ohms load <1kHz) 
  • Input High Pass Filter: 80Hz 2nd order 
  • Distortion (SMPTE, typical): <0.5% 
  • Distortion (THD-N, typical): <0.5% (8 Ohms, 10dB below rated power, 20Hz–20kHz) 
  • Channel Separation: -75dB (dB from full output, 1kHz) 
  • Signal to Noise (20Hz–20kHz, unweighted): >114dB (all 3.0x models)
                                                                                  >111dB (all 1.5x models)
                                                                                  >108dB (all 800x models)
                                                                                  >105dB (all 400x models) 
  • Frequency Response: 20Hz–20kHz, +/-0.05dB
  • Balanced Input Connector : Euroblock 3.5mm, 1/4” TRS and XLR Combo jack 
  • Input Impedance: 10k Ohms 
  • Maximum Input Level: +21dBu 
  • Speaker Output Connector: Neutrik® speakON® 
  • Remote DC Level Control: Euroblock 3.5mm - Gnd, CV, V+ per input 
  • Attenuators (per channel): Front panel and remote. Fully off = Mute 
  • Amplifier Protection: Inrush current limitation, temperature monitoring, output over-power protection, mains fuses 
  • Airflow: In through sides, Out through front 
  • Cooling: Continuously variable temperature controlled axial fan(s) 
  • Environmental: 32–113 deg F, (0–45 deg, C) (noncondensing)


Product Downloads

  • nXe Data Sheet PDF 0.8 MB
  • nXe User Manual PDF 5.4 MB


Take The Next Step

Enquire about this product

Product Categories

*Prices are in AUD, include GST and are subject to change. Please call National Audio for pricing and availability on the nXe.